590+1600/500 Parker Hannifin
Parker Hannifin 590+ 460V 1000HP 1600A
The Integrator series is a single family of both AC drives (AC690+) and DC drives (DC590+) that provides the benefits of common programming, set-up and communication across both technologies. The DC590+ Integrator series highly advanced DC drive meets the demands of the most complex motor control applications. Extensive application software (including winder control as standard) together with Function Block Programming and configurable I/O creates a total drive system in a single module.
590+1600/500 Parker Hannifin 590+ 460V 1000HP 1600A
Markets:
• Plastic Processing
• Primary Metal Refining/Process
• Miscellaneous Processing
• Converting
• Pulp & Paper
• Rubber & Tire Processing
• Wire & Cable Processing
• Factory Automation
Features/Benefits:
• Extremely simple set-up and programming
• Extremely Compact
• Removable Key Pad
• Motor Thermistor Input
• 598+ and 599+ Stack Controller configuration available for retrofit of existing power stacks
• Macro Function Blocks:
- Open-loop winder control
- Winder control - loadcell/dancer
- Section control
- Math functions
- Embedded controller functions
Applications:
• Converting Machinery
• Plastics processing Machinery
• Wire & Cable Machinery
• Automotive Test Stands
• Extruders & Mixers
• Winders
Technical Specifications:
Power Supply:
Three Phase
110-220VAC ± 10 %, 50-60 Hz ± 5%
220-500VAC ± 10 %, 50-60 Hz ± 5%
500-690VAC ± 10 %, 50-60 Hz ± 5%
Output Armature Current Ratings:
15 - 2700A (15 - 165A for DRV Versions)
Protection:
IP00 / IP20 on frame size 1 (15-35A) drives only [Europe]
UL Open Type [North America/Canada]
Speed Feedback:
- Armature Voltage Feedback / - Tach Generator / - Encoder
Inputs/Outputs:
Analog: 5 inputs / 3 outputs
Digital: 9 inputs / 3 outputs
Reference Supplies:
- 1x- +10VDC / 1x -10VDC / 1x +24VDC
Power Bridge:
590+ - 4 Quadrant Regenerative : Dual Three Phase SCR bridges
591+ - 2 Quadrant Non-Regenerative : Single SCR bridge
Variable Field Control with SCR's
Drive Protection:
- High energy MOV’s / - Heatsink overtemperature / - Instantaneous overcurrent
- Thyristor trigger failure / - Inverse time overcurrent / - Interline snubber network
- Field Failure / - Zero speed detection / - Speed feedback failure / - Stall protection
- Motor overtemperature / - Stall protection
BRAND
Parker
PRODUCT TYPE
DC Drive
DRIVE FORMAT
Single Axis Technology
SERIES
DC590
INPUT SUPPLY VOLTAGE
3*230VAC
3*380-480VAC
3*500-690VAC
CONTINUOUS OUTPUT CURRENT RATING
15 - 1950A
OUTPUT RATING (HP)
1 - 1200HP
SUPPORTED MOTOR TYPES
DC Brushed Servo
SUPPORTED FEEDBACK DEVICE
Armature Voltage
Tachometer
Encoder
MODES OF CONTROL
Regenerative
Non-Regenerative
Stack Controller
COMMUNICATION INTERFACE
RS232 / RS485
CANopen
ControlNet
DeviceNet
Profibus
Ethernet TCP/IP
Link Communications
Modbus
OPERATING TEMPERATURE (C)
0 - 45C (15-165A) / derate up to 55C max
0 - 35C (180-270A) / derate up to 55C max
0 - 40C (380-1950A) / derate up to 55C max
OPERATING TEMPERATURE (F)
32 - 113F (15-165A) / derate up to 131F max
32 - 95F (180-270A / derate up to 131F max
32 - 104F (380-1950A) / derate up to 131F max
OPERATING ALTITUDE
Up to 500m ASL (derate > 500m)
OVERLOAD RATINGS
150% for 30s
200% for 10s
(depending on drive output current, refer to manual for details)
CERTIFICATES
CE (EMC & LVD)
Overvoltage Category III
Pollution Degree II
UL Listed
cUL Listed
